Using Linear Periodization

 

by Greg Nuckols T-Nation

 

Here’s what you need to know…

 

• The tried-and-true method of just putting more weight on the bar works, and not just for beginners.

 

• Why make things overly complicated when they don’t need to be? Keep a rep max calculator handy and as long as you’re projecting numbers that are above your current 1RM, you’re golden.

 

Our first days in the gym were probably a bizarre array of curls, flyes, and crunches, but something clicked the day someone explained that the way you get bigger and stronger was to simply put more weight on the bar each time you hit the gym. It just made so much sense. So that’s what we did, and it worked like a charm.

 

However, we eventually plateaued, and at that point we got too smart for our own good. We started doing block periodization, the conjugate method, drop sets, extended sets, rest-pause sets, concurrent or undulating models, and even Frankenstein methods that combined all of the above.

 

That stuff isn’t worthless; far from it. I just want to remind everyone (myself included) that the un-sexy, tried-and-true method of just putting more weight on the bar works, and not just for newbies.

 

We sometimes have short memories in the iron game, so we’re seduced by whatever program the best lifters of today are using, in the meantime forgetting the programming of legends like Ed Coan, Doug Furnas, Fred Hatfield, and Lamar Gant. These guys would pick a meet and over 12 or 16 weeks, they’d just add weight to the bar every week until they were primed to hit PRs on meet day. It’s time to revisit those simpler days and techniques.

 

 

Linear Periodization for Intermediates

There are plenty of popular programs that provide basic linear progressions for beginners, but let’s discuss how to apply those same principles once you plateau on your beginner program.

 

The only thing you have to change as an intermediate is to expand your rep ranges. Instead of constantly staying in the same rep range, start at about 70% of your max and hit as many reps as you can. Drop 5% on the next set and try to match your reps from the first set. Drop 5% more and beat your rep number from the first two sets.

 

The two drop-back sets will usually land you between 15 and 40 working reps a week, which is the range proven to work for a combination of both strength and hypertrophy by countless programs.

 

The next week, add 5 pounds to the bar for overhead press, 10 pounds for bench, and 15-20 for squats or deadlifts and try your hardest not to lose reps. Obviously you’ll lose reps over time as the weights get heavier, but really fight to make that as slow of a process as possible.

 

To make sure you’re on the right track, plug your top set of the day into a rep-max calculator. As long as you’re teetering around or above your old max, you’ll probably be good for a PR at the end of the program. Once you’re hitting a triple for your first set, deload for a week, hit a new max, and start over. It’s that simple.

 

If you’re a 300-pound bencher, this is what it would look like (theoretical numbers):

 

Week 1: 210×12, 195×12, 180×15 projected max 300 (as based on rep-max calculator)

Week 2: 220×12, 205×12, 190×13 projected max 314

Week 3: 230×10, 215×10, 200×12 projected max 307

Week 4: 240×8, 225×8, 210×11 projected max 308

Week 5: 250×7, 235×7, 220×9 projected max 312

Week 6: 260×6, 245×6, 230×8 projected max 313

Week 7: 270×5, 255×5, 240×8 projected max 313

Week 8: 280×4, 265×4, 250×7 projected max 318

Week 9: 290×3, 275×3, 260×6 projected max 322

Week 10: 225 5×5 (deload)

Week 11: Bench to a new 1RM, which will probably be 315-325

Week 12: 225×12, 210×12, 195×15

 

 

Linear Periodization for Advanced Lifters

Once this basic intermediate program no longer works for you, you can add one more wrinkle by moving through progressively stronger variations of a lift. Don’t be too hasty, though. I fall back on the basic intermediate program as a plateau-buster from time to time and it hasn’t let me down yet.

 

The basic setup for advanced lifters is exactly the same except you start around 70% of your weakest variation and when you’re hitting 5s on one variation of a lift, move to a stronger variation the next week.

 

The progression of weakest variation of a lift to stronger variation, for example on squats, could look like this:

 

• From front squat

• To beltless high-bar squat

• To high-bar squat with a belt

• To low-bar squat with a belt

• To low-bar squat with belt and knee warps

 

For bench, it might look like this:

 

• From close-grip bench with a long pause on each rep

• To close-grip touch and go

• To competition grip bench with a pause

• To competition grip bench touch and go

 

For deadlifts, you might start with a snatch-grip deadlift and gradually bring your hands in as the weights get heavier.

 

Here’s how the progression might look if you’re 600-pound squatter:

 

Week 1: Front squat 300×8, 270×8, 240×12

Week 2: Front squat 310×7, 280×7, 250×10

Week 3: Front squat 320×6, 295×6, 260×9

Week 4: Front squat 330×5, 305×5, 270×8

Week 5: Beltless high-bar squat 340×7, 310×7, 280×10

 

To continue our theoretical musings, this person may need to start using a belt at 380×5; switch to low bar at 440×5; start wearing knee wraps at 520×5; and then eventually work up to a 3RM at 580 before deloading for a week, followed by a new max of around 650 the following week.

 

I’m not saying this approach constitutes rocket science, but why make things overly complicated when they don’t need to be? Just keep a rep max calculator handy, and as long as you’re projecting numbers that are beating your current 1RM, you’re good to go.

 

To provide you with some additional landmarks, hitting more than 75% of your current max for 10, more than 80% for 8, more than 85% for 5, and more than 90% for three means you’re on the right track.

 

 

Tweaks and Tips

For deadlifts, it’s advisable to just do one drop-back set, especially if you’re not used to higher-rep training. Likewise, avoid going to failure. Stop each set on the last rep you know for sure you can get.

 

Don’t get greedy and make your jumps too large. There should be at least 2-3 months between your first week and your 1RM attempt on the intermediate program, and 3-4 months minimum for the advanced plan.

 

Remember, the whole point is that since you’re no longer a total beginner, progress happens over a span of months rather than weeks or days. On a similar note, don’t get upset by relatively modest gains. Gaining 5% on a lift in a few months is huge. Over time, that adds up.

 

If you’re training for a meet, pick reasonable goals for the meet (103% of your current max or so) and work backwards, just like the legends of the 70s, 80s, and 90s. If you currently squat 385 and want to squat 400 at a meet 12 weeks away, hit 360×3 on your last heavy training day (90% of your hopeful max), and work backward from there, starting at 250 and working to keep your projected max at or above 400.

 

Although I experiment with lots of different training methods in my off season, this is how I always peak for a meet and it hasn’t let me down yet.

 

 

Simple and Effective

If you’ve gotten to this point in article and you’re thinking, “Well, that wasn’t exciting or revolutionary,” then ta-da! That’s the entire point. This approach is simple, it’s effective, and it’s almost forgotten in a modern gym culture that’s always pursing the “next big thing.”

 

Although most of us are aware of linear periodization, we’re somehow quick to dismiss what worked for countless lifters over many decades, producing arguably the best generation of lifters the sport of powerlifting has ever seen.

 

Source: http://www.t-nation.com/training/how…-periodization

Be Sociable, Share!

Leave a Reply

* Copy This Password *

* Type Or Paste Password Here *